(r2) EvoVideoConferencing < Computing/Documentation

Tags: view all tags
---++ EVO Video Conferencing
---+ If you think any information on this website needs update or change, please contact PPD IT Helpdesk

*Evo H.323 settings*

| *Room* | *Building* | *Location* | *Extension Number* | *Standard VLAN to PPD (if requested)* |
| CR1 | R1 | Inside | 6436 | |
| | | Outside | 5853 | |
| CR2 | R1 | Inside | 6045 | |
| CR3 | R61 | Inside | 6442 | 28 |
| CR4 | R1 | Inside | 6854 | R1-2-315A |
| CR8 | R27 | Outside | 6395 | |
| | | Projection Room | 5397 | |
| CR9 | R26 | Inside | 6870 | |
| CR10 | R26 | Inside | 6974 | |
| CR11 | R3 | Outside | 5819 | |
| CR12 | R68 | Inside | 6706 | 16 |
| CR13 | R68 | Inside | 6705 | |
| | | Outside | 6707 | |
| Lecture Theatre | R22 | Projection Room<br />Under Lectern | 5496<br />5862 | |

---++ Seting up EVO
   * Booking the EVO Meeting
<blockquote>
   * Book meeting in EVO http://evo.caltech.edu/evoGate/
   * Book meeting in the appropriate Conference Room and inform PPD IT Suport 
      * Make sure you let us know several days in advance
      * Make sure we have a laptop in Loan Pool in case you don't have your own 
         * If you are using your own laptop perform a full software update (one day before if possible) to ensure the system works well in the meeting
      * Leave plenty of time before and after the meeting for set up/clear up. Book an extra 30-60 minutes either side if necessary
      * Verify the job has been done as required
   * Now we contact Networks to ask them to configure a port for your meeting.
</blockquote> 
   * During Meeting
<blockquote>
   * Start the video conferencing system using the box or remote controls, as appropriate
   * Set up the conferencing sound system if necessary
   * Make sure your laptop is connected to the PPD LAN Network (It should be fine if you are using the port which was configured for you, otherwise you will have to VPN to PPD LAN)
   * Connect the laptop to the video conferencing system via the VGA port
   * Run all cables through the rubber strips to placate the H&S teams
   * If you are using H.323 video conferencing equipment, you need to set the following options 
      * In EVO go to Configuration &gt; Videoconference Client and select EVO.H.323
      * Set the Gatekeeper address to &lt;conference room telephone number&gt;@130.246.239.61 i.e. 5486@130.246.239.61 for the PPD Norton Room
   * See the table above for more room details, included wall port sugestions
   * In some rooms, connections through EVO are patchy. Set the BANDWIDTH to maximum in the H.323 configuration settings.
When connecting to the meeting in EVO, there should be an audible ringing in the room from the sound system. If you do not hear this, check your EVO settings.<br /><br />Some rooms have a large red 'on air' lamp at the front or side, indicating the video systems is active. <br /></blockquote>
Topic revision: r2 - 2011-01-25 - LukaszKaczor